Merge branch 'master' into cxh_dev

# Conflicts:
#	func/Module_approximately_align.py

func/Module_approximately_align.py

@@ -12,6 +12,7 @@ from overrides import overrides
 from pandas import read_csv, DataFrame
 from scipy.signal import find_peaks, resample, butter, sosfiltfilt, correlate
 from yaml import dump, load, FullLoader
+from sklearn.linear_model import TheilSenRegressor
 
 from func.utils.ConfigParams import Filename, Params
 from func.utils.PublicFunc import PublicFunc
@@ -45,7 +46,9 @@ ButtonState = {
         "radioButton_PABD": False,
         "radioButton_NTHO": False,
         "radioButton_NABD": False,
-        "radioButton_custom": False
+        "radioButton_custom": False,
+        "radioButton_freqTHO": False,
+        "radioButton_freqABD": False,
     },
     "Current": {
         "pushButton_input_setting": True,
@@ -66,7 +69,9 @@ ButtonState = {
         "radioButton_PABD": False,
         "radioButton_NTHO": False,
         "radioButton_NABD": False,
-        "radioButton_custom": False
+        "radioButton_custom": False,
+        "radioButton_freqTHO": False,
+        "radioButton_freqABD": False,
     }
 }
 
@@ -254,6 +259,8 @@ class MainWindow_approximately_align(QMainWindow):
         self.ui.radioButton_PABD.clicked.connect(self.__enableAlign__)
         self.ui.radioButton_NABD.clicked.connect(self.__enableAlign__)
         self.ui.radioButton_custom.clicked.connect(self.__enableAlign__)
+        self.ui.radioButton_freqTHO.clicked.connect(self.__EstimateFrequencySelect__)
+        self.ui.radioButton_freqABD.clicked.connect(self.__EstimateFrequencySelect__)
 
 
     @overrides
@@ -300,6 +307,11 @@ class MainWindow_approximately_align(QMainWindow):
         self.ui.radioButton_NABD.setText("备选4")
         self.ui.radioButton_NTHO.setText("备选2")
         self.ui.spinBox_SelectEpoch.setMinimum(0)
+        self.ui.radioButton_freqABD.setChecked(False)
+        self.ui.radioButton_freqTHO.setChecked(False)
+        self.ui.radioButton_freqTHO.setText("备选1")
+        self.ui.radioButton_freqABD.setText("备选2")
+
 
     def __plot__(self, *args, **kwargs):
         sender = self.sender()
@@ -323,7 +335,7 @@ class MainWindow_approximately_align(QMainWindow):
             elif sender == self.ui.radioButton_custom:
                 result = self.DrawPicTryAlign()
             elif sender == self.ui.pushButton_ChangeView:
-                result = self.DrawAlignScatter()
+                result = self.DrawAlignScatter(*args, **kwargs)
             elif sender == self.ui.pushButton_JUMP:
                 result = self.DrawPicByEpoch(*args, **kwargs)
             elif sender == self.ui.pushButton_EM1:
@@ -572,7 +584,39 @@ class MainWindow_approximately_align(QMainWindow):
 
         # 绘图
         PublicFunc.progressbar_update(self, 1, 1, Constants.DRAWING_DATA, 0)
-        result = self.__plot__()
+        response = self.data.get_corr_by_epoch()
+        epoch_min = response.data["epoch_min"]
+        epoch_max = response.data["epoch_max"]
+        tho_bias_list = response.data["tho_bias_list"]
+        abd_bias_list = response.data["abd_bias_list"]
+
+        response = self.data.estimate_frequency(tho_bias_list)
+        tho_y = response.data["estimate_y"]
+        tho_frequency = response.data["frequency"]
+        tho_slope = response.data["slope"]
+        tho_intercept = response.data["intercept"]
+        response = self.data.estimate_frequency(abd_bias_list)
+        abd_y = response.data["estimate_y"]
+        abd_frequency = response.data["frequency"]
+        abd_slope = response.data["slope"]
+        abd_intercept = response.data["intercept"]
+        result = self.__plot__(epoch_min, epoch_max, tho_bias_list, abd_bias_list, tho_y, abd_y,
+                               tho_frequency, abd_frequency)
+        Config["estimate"] = {}
+        Config["estimate"]["tho_frequency"] = tho_frequency
+        Config["estimate"]["tho_slope"] = tho_slope
+        Config["estimate"]["tho_intercept"] = tho_intercept
+
+        Config["estimate"]["abd_frequency"] = abd_frequency
+        Config["estimate"]["abd_slope"] = abd_slope
+        Config["estimate"]["abd_intercept"] = abd_intercept
+
+        self.ui.radioButton_freqTHO.setText(str(Config["estimate"]["tho_frequency"]))
+        self.ui.radioButton_freqABD.setText(str(Config["estimate"]["abd_frequency"]))
+        ButtonState["Current"]["radioButton_freqTHO"] = True
+        ButtonState["Current"]["radioButton_freqABD"] = True
+
+
         if not result.status:
             PublicFunc.text_output(self.ui, "(1/1)" + result.info, Constants.TIPS_TYPE_ERROR)
             PublicFunc.msgbox_output(self, result.info, Constants.MSGBOX_TYPE_ERROR)
@@ -601,6 +645,25 @@ class MainWindow_approximately_align(QMainWindow):
 
         PublicFunc.finish_operation(self, ButtonState)
 
+    def __EstimateFrequencySelect__(self):
+        PublicFunc.__disableAllButton__(self, ButtonState)
+        if self.ui.radioButton_freqTHO.isChecked():
+            frequency = Config["estimate"]["tho_frequency"]
+            Config["estimate_freq"] = frequency
+            Config["estimate_slope"] = Config["estimate"]["tho_slope"]
+            Config["estimate_intercept"] = Config["estimate"]["tho_intercept"]
+        elif self.ui.radioButton_freqABD.isChecked():
+            frequency = Config["estimate"]["abd_frequency"]
+            Config["estimate_freq"] = frequency
+            Config["estimate_slope"] = Config["estimate"]["abd_slope"]
+            Config["estimate_intercept"] = Config["estimate"]["abd_intercept"]
+        else:
+            return
+
+        ButtonState["Current"]["pushButton_save"] = True
+        PublicFunc.finish_operation(self, ButtonState)
+
+
     def __EpochChange__(self):
         # 获取当前值
         value = self.ui.spinBox_SelectEpoch.value()
@@ -684,7 +747,6 @@ class MainWindow_approximately_align(QMainWindow):
         ButtonState["Current"]["pushButton_EP1"] = True
         ButtonState["Current"]["pushButton_EP10"] = True
         ButtonState["Current"]["pushButton_EP100"] = True
-        ButtonState["Current"]["pushButton_save"] = True
         ButtonState["Current"]["pushButton_ChangeView"] = True
         PublicFunc.finish_operation(self, ButtonState)
 
@@ -888,21 +950,26 @@ class MainWindow_approximately_align(QMainWindow):
         # 返回图片以便存到QPixImage
         return Result().success(info=Constants.DRAW_FINISHED)
 
-    def DrawAlignScatter(self):
+    def DrawAlignScatter(self, epoch_min, epoch_max, tho_bias_list, abd_bias_list, tho_y, abd_y,
+                               tho_frequency, abd_frequency):
         try:
-            response = self.data.get_corr_by_epoch()
-            epoch_min = response.data["epoch_min"]
-            epoch_max = response.data["epoch_max"]
-            tho_bias_list = response.data["tho_bias_list"]
-            abd_bias_list = response.data["abd_bias_list"]
-
             ax1 = self.fig.add_subplot(211)
             ax1.scatter(linspace(epoch_min, epoch_max, len(tho_bias_list)), tho_bias_list,  alpha=0.2)
+            ax1.plot(linspace(epoch_min, epoch_max, len(tho_bias_list)), tho_y, color='orange', label=f"THO Frequency: {tho_frequency} Hz")
+            ax1.axhline(y=0, color='red', linestyle='--', alpha=0.3)
+            ax1.set_xlabel("Epoch")
+            ax1.set_ylabel("Tho Bias / s")
             ax1.set_title("THO")
+            ax1.legend()
 
             ax2 = self.fig.add_subplot(212)
             ax2.scatter(linspace(epoch_min, epoch_max, len(abd_bias_list)), abd_bias_list, alpha=0.2)
+            ax2.plot(linspace(epoch_min, epoch_max, len(abd_bias_list)), abd_y, color='orange', label=f"ABD Frequency: {abd_frequency} Hz")
+            ax2.axhline(y=0, color='red', linestyle='--', alpha=0.3)
+            ax2.set_xlabel("Epoch")
+            ax2.set_ylabel("Abd Bias / s")
             ax2.set_title("ABD")
+            ax2.legend()
             self.fig.canvas.draw()
 
             return Result().success(info=Constants.DRAW_FINISHED)
@@ -924,8 +991,7 @@ class Data:
         self.processed_downsample_orgBcg = None
         self.processed_downsample_Tho = None
         self.processed_downsample_Abd = None
-        self.relate_list = None
-        self.relate_point = None
+
 
     def open_file(self):
         if Path(Config["Path"]["Input_orgBcg"]).is_file():
@@ -974,8 +1040,18 @@ class Data:
         try:
             pos = Config["pos"]
             ApplyFrequency = Config["ApplyFrequency"]
+            estimate_freq = Config["estimate_freq"]
+            estimate_slope = Config["estimate_slope"]
+            estimate_intercept = Config["estimate_intercept"]
             # 保存到csv中
-            df = DataFrame({"pos": [pos], "epoch": [epoch], "ApplyFrequency": [ApplyFrequency]})
+            df = DataFrame({"pos": [pos],
+                            "epoch": [epoch],
+                            "ApplyFrequency": [ApplyFrequency],
+                            "estimate_freq": [estimate_freq],
+                            "estimate_slope": [estimate_slope],
+                            "estimate_intercept": [estimate_intercept]
+                            })
+
             df.to_csv(Path(Config["Path"]["Save"]), mode="w", header=True, index=False)
         except PermissionError as e:
             return Result().failure(info=Constants.SAVE_FAILURE + Constants.FAILURE_REASON["Save_Permission_Denied"])
@@ -1217,6 +1293,7 @@ class Data:
 
             epoch_min = response.data["epoch_min"]
             epoch_max = response.data["epoch_max"]
+            epoch_second = Params.APPROXIMATELY_ALIGN_CONFIG_NEW_CONTENT["Second_PerEpoch"]
 
             temp_freq = Params.APPROXIMATELY_ALIGN_CONFIG_NEW_CONTENT["TempFrequency"]
             window_epoch = Params.APPROXIMATELY_ALIGN_CONFIG_NEW_CONTENT["CorrByEpoch"]["window_epoch"]
@@ -1227,8 +1304,8 @@ class Data:
             pos = Config["pos"] * temp_freq // Config["ApplyFrequency"]
 
             for epoch in range(epoch_min, epoch_max):
-                SP = epoch * 30 * temp_freq
-                EP = (epoch + window_epoch) * 30 * temp_freq
+                SP = epoch * epoch_second * temp_freq
+                EP = (epoch + window_epoch) * epoch_second * temp_freq
                 tho_seg = self.processed_Tho[SP:EP]
                 abd_seg = self.processed_Abd[SP:EP]
 
@@ -1238,8 +1315,8 @@ class Data:
                 tho_seg_pos = argmax(tho_relate_seg) - len(orgBcg_seg)
                 abd_seg_pos = argmax(abd_relate_seg) - len(orgBcg_seg)
 
-                tho_bias_list.append(tho_seg_pos // temp_freq)
-                abd_bias_list.append(abd_seg_pos // temp_freq)
+                tho_bias_list.append(tho_seg_pos / temp_freq)
+                abd_bias_list.append(abd_seg_pos / temp_freq)
 
             result = {
                 "tho_bias_list": tho_bias_list,
@@ -1254,3 +1331,32 @@ class Data:
                     "Get_Corr_By_Epoch_Exception"] + "\n" + format_exc())
 
         return Result().success(info=Constants.APPROXIMATELY_EPOCH_GET_FINISHED, data=result)
+
+    @staticmethod
+    def estimate_frequency(bias_list):
+        try:
+            epoch_second = Params.APPROXIMATELY_ALIGN_CONFIG_NEW_CONTENT["Second_PerEpoch"]
+            temp_freq = Params.APPROXIMATELY_ALIGN_CONFIG_NEW_CONTENT["TempFrequency"]
+
+            # 生成线性数据
+            X = linspace(0, len(bias_list), len(bias_list)).reshape(-1, 1)
+            y = bias_list
+
+            theilsen = TheilSenRegressor()
+            theilsen.fit(X, y)
+            slope = theilsen.coef_[0]
+            frequency = 1 - slope / epoch_second / temp_freq if slope != 0 else float('inf')
+
+            theilsen_y = theilsen.predict(X)
+
+            return Result().success(info=Constants.APPROXIMATELY_ESTIMATE_FREQUENCY_FINISHED,
+                                    data={"estimate_y": theilsen_y,
+                                          "frequency": frequency,
+                                          "slope": slope,
+                                          "intercept": theilsen.intercept_},
+                                          )
+        except Exception as e:
+            return Result().failure(
+                info=Constants.APPROXIMATELY_ESTIMATE_FREQUENCY_FAILURE + Constants.FAILURE_REASON[
+                    "Estimate_Frequency_Exception"] + "\n" + format_exc())
+

func/Module_mainwindow.py

@@ -283,6 +283,7 @@ class MainWindow(QMainWindow, Ui_Signal_Label):
         sub_folders = [item.name for item in Path(path).iterdir() if item.is_dir()]
         self.ui.comboBox_sampID.clear()
         self.ui.comboBox_sampID.addItems(sub_folders)
+        self.ui.comboBox_sampID.setCurrentIndex(0)
 
     def check_root_path(self):
         if self.ui.plainTextEdit_root_path.toPlainText() == Constants.STRING_IS_EMPTY:

func/Module_precisely_align.py

@@ -9,7 +9,8 @@ from PySide6.QtWidgets import QMessageBox, QMainWindow, QApplication, QButtonGro
 from matplotlib import gridspec, patches
 from matplotlib.backends.backend_qt import NavigationToolbar2QT
 from matplotlib.backends.backend_qtagg import FigureCanvasQTAgg
-from numpy import (diff, where, correlate, corrcoef, sum as np_sum, max as np_max, min as np_min, arange, array,
+from numpy import (diff, where, correlate, corrcoef, searchsorted, sum as np_sum, max as np_max, min as np_min, arange,
+                   array,
                    append, delete, abs as np_abs, argmin as np_argmin, argmax as np_argmax, asarray)
 from overrides import overrides
 from pandas import read_csv, DataFrame
@@ -25,7 +26,6 @@ from func.utils.Result import Result
 from ui.MainWindow.MainWindow_precisely_align import Ui_MainWindow_precisely_align
 from ui.setting.precisely_align_input_setting import Ui_MainWindow_precisely_align_input_setting
 
-
 Config = {
 
 }
@@ -191,7 +191,8 @@ class SettingWindow(QMainWindow):
         self.ui.plainTextEdit_file_path_input_Jpeak.setPlainText(Config["Path"]["Input_Jpeak"])
         self.ui.plainTextEdit_file_path_input_ECG.setPlainText(Config["Path"]["Input_ECG"])
         self.ui.plainTextEdit_file_path_input_Rpeak.setPlainText(Config["Path"]["Input_Rpeak"])
-        self.ui.plainTextEdit_file_path_input_approximately_align.setPlainText(Config["Path"]["Input_Approximately_Align"])
+        self.ui.plainTextEdit_file_path_input_approximately_align.setPlainText(
+            Config["Path"]["Input_Approximately_Align"])
         self.ui.plainTextEdit_file_path_save_AlignInfo.setPlainText(Config["Path"]["Save_AlignInfo"])
         self.ui.plainTextEdit_file_path_save_orgBcg.setPlainText(Config["Path"]["Save_OrgBCG"])
         self.ui.plainTextEdit_file_path_save_BCG.setPlainText(Config["Path"]["Save_BCG"])
@@ -209,7 +210,8 @@ class SettingWindow(QMainWindow):
         Config["Path"]["Input_Jpeak"] = self.ui.plainTextEdit_file_path_input_Jpeak.toPlainText()
         Config["Path"]["Input_ECG"] = self.ui.plainTextEdit_file_path_input_ECG.toPlainText()
         Config["Path"]["Input_Rpeak"] = self.ui.plainTextEdit_file_path_input_Rpeak.toPlainText()
-        Config["Path"]["Input_Approximately_Align"] = self.ui.plainTextEdit_file_path_input_approximately_align.toPlainText()
+        Config["Path"][
+            "Input_Approximately_Align"] = self.ui.plainTextEdit_file_path_input_approximately_align.toPlainText()
         Config["Path"]["Save_AlignInfo"] = self.ui.plainTextEdit_file_path_save_AlignInfo.toPlainText()
         Config["Path"]["Save_OrgBCG"] = self.ui.plainTextEdit_file_path_save_orgBcg.toPlainText()
         Config["Path"]["Save_BCG"] = self.ui.plainTextEdit_file_path_save_BCG.toPlainText()
@@ -453,7 +455,8 @@ class MainWindow_precisely_align(QMainWindow):
                 self.ax1.axvline(x=self.data.approximately_align_pos, color=Constants.PLOT_COLOR_BLACK, linestyle="--",
                                  label="Start Line")
             else:
-                self.ax0.axvline(x=self.data.approximately_align_pos, color=Constants.PLOT_COLOR_BLACK, linestyle="--", label="Start Line")
+                self.ax0.axvline(x=self.data.approximately_align_pos, color=Constants.PLOT_COLOR_BLACK, linestyle="--",
+                                 label="Start Line")
                 self.ax1.axvline(x=self.data.approximately_align_pos, color=Constants.PLOT_COLOR_BLACK, linestyle="--",
                                  label="Start Line")
 
@@ -461,7 +464,8 @@ class MainWindow_precisely_align(QMainWindow):
             self.ax1.legend(loc=Constants.PLOT_UPPER_RIGHT)
             self.canvas.draw()
             return Result().success(info=Constants.DRAW_FINISHED)
-        elif sender == self.ui.pushButton_calculate_correlation and plot_element is not None and plot_element["mode"] == "init":
+        elif sender == self.ui.pushButton_calculate_correlation and plot_element is not None and plot_element[
+            "mode"] == "init":
             self.gs = gridspec.GridSpec(2, 2, height_ratios=[1, 1], width_ratios=[1, 1])
             self.fig.subplots_adjust(top=0.88, bottom=0.05, right=0.98, left=0.05, hspace=0.15, wspace=0.15)
             self.ax0 = self.fig.add_subplot(self.gs[0])
@@ -487,7 +491,8 @@ class MainWindow_precisely_align(QMainWindow):
             self.ax0.stem(plot_element["front"]["corre"], markerfmt="C0.",
                           label=Constants.PRECISELY_ALIGN_PLOT_LABEL_CORRE_RRIV_JJIV)
             self.selected_point0, = self.ax0.plot(plot_element["front"]["shift"],
-                                                  plot_element["front"]["corre"][plot_element["front"]["shift"]] + 1, 'v',
+                                                  plot_element["front"]["corre"][plot_element["front"]["shift"]] + 1,
+                                                  'v',
                                                   color=Constants.PLOT_COLOR_RED, picker=True, pickradius=5,
                                                   label=Constants.PRECISELY_ALIGN_PLOT_LABEL_SELECTED_POINT)
             self.ax0.plot(plot_element["front"]["corre"], 'o', color=Constants.PLOT_COLOR_BLUE,
@@ -495,8 +500,10 @@ class MainWindow_precisely_align(QMainWindow):
             self.ax1.stem(plot_element["front"]["RRIVs"], markerfmt="b.", linefmt=Constants.PLOT_COLOR_ORANGE,
                           label=Constants.PRECISELY_ALIGN_PLOT_LABEL_RRIV)
             self.stem_black0 = self.ax1.stem(arange(plot_element["front"]["shift"],
-                                                    plot_element["front"]["shift"] + len(plot_element["front"]["JJIVs"])),
-                                             plot_element["front"]["JJIVs"], markerfmt="ko", linefmt=Constants.PLOT_COLOR_GREEN,
+                                                    plot_element["front"]["shift"] + len(
+                                                        plot_element["front"]["JJIVs"])),
+                                             plot_element["front"]["JJIVs"], markerfmt="ko",
+                                             linefmt=Constants.PLOT_COLOR_GREEN,
                                              label=Constants.PRECISELY_ALIGN_PLOT_LABEL_JJIV)
             self.ax2.set_title(
                 "back\ncorre_IIV: {}, corre_II: {}\nsame_sign_rate:{}, total_time_ratio: {}\nshift: {}, alignment offset: {} seconds\noffset_interval: {}, anchor_J: {}, anchor_R: {}".format(
@@ -512,12 +519,13 @@ class MainWindow_precisely_align(QMainWindow):
                                                   color=Constants.PLOT_COLOR_RED, picker=True, pickradius=5,
                                                   label=Constants.PRECISELY_ALIGN_PLOT_LABEL_SELECTED_POINT)
             self.ax2.plot(plot_element["back"]["corre"], 'o', color=Constants.PLOT_COLOR_BLUE,
-                                         markersize=3, picker=True, pickradius=5)
+                          markersize=3, picker=True, pickradius=5)
             self.ax3.stem(plot_element["back"]["RRIVs"], markerfmt="b.", linefmt=Constants.PLOT_COLOR_ORANGE,
                           label=Constants.PRECISELY_ALIGN_PLOT_LABEL_RRIV)
             self.stem_black1 = self.ax3.stem(arange(plot_element["back"]["shift"],
                                                     plot_element["back"]["shift"] + len(plot_element["back"]["JJIVs"])),
-                                             plot_element["back"]["JJIVs"], markerfmt="ko", linefmt=Constants.PLOT_COLOR_GREEN,
+                                             plot_element["back"]["JJIVs"], markerfmt="ko",
+                                             linefmt=Constants.PLOT_COLOR_GREEN,
                                              label=Constants.PRECISELY_ALIGN_PLOT_LABEL_JJIV)
 
             self.ax0.legend(loc=Constants.PLOT_UPPER_RIGHT)
@@ -527,7 +535,8 @@ class MainWindow_precisely_align(QMainWindow):
 
             self.canvas.draw()
             return Result().success(info=Constants.DRAW_FINISHED)
-        elif sender == self.ui.pushButton_correlation_align or (plot_element is not None and plot_element["mode"] == "select"):
+        elif sender == self.ui.pushButton_correlation_align or (
+                plot_element is not None and plot_element["mode"] == "select"):
             self.gs = gridspec.GridSpec(1, 1, height_ratios=[1])
             self.fig.subplots_adjust(top=0.95, bottom=0.05, right=0.98, left=0.05, hspace=0, wspace=0)
             self.ax4 = self.fig.add_subplot(self.gs[0])
@@ -535,14 +544,20 @@ class MainWindow_precisely_align(QMainWindow):
             self.ax4.xaxis.set_major_formatter(Params.FORMATTER)
 
             self.ax4.set_title("offset correct")
-            self.ax4.plot(plot_element["cut_ECG"], color=Constants.PLOT_COLOR_GREEN, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_ECG)
-            self.ax4.plot(plot_element["res_BCG"], color=Constants.PLOT_COLOR_ORANGE, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_BCG)
-            self.ax4.plot([plot_element["anchor00"], plot_element["anchor00"]], [plot_element["b"], plot_element["a"]], 'k--')
-            self.ax4.plot([plot_element["anchor10"], plot_element["anchor10"]], [plot_element["b"], plot_element["a"]], 'k--')
+            self.ax4.plot(plot_element["cut_ECG"], color=Constants.PLOT_COLOR_GREEN,
+                          label=Constants.PRECISELY_ALIGN_PLOT_LABEL_ECG)
+            self.ax4.plot(plot_element["res_BCG"], color=Constants.PLOT_COLOR_ORANGE,
+                          label=Constants.PRECISELY_ALIGN_PLOT_LABEL_BCG)
+            self.ax4.plot([plot_element["anchor00"], plot_element["anchor00"]], [plot_element["b"], plot_element["a"]],
+                          'k--')
+            self.ax4.plot([plot_element["anchor10"], plot_element["anchor10"]], [plot_element["b"], plot_element["a"]],
+                          'k--')
             self.point0, = self.ax4.plot(plot_element["peak_ECG"], plot_element["cut_ECG"][plot_element["peak_ECG"]],
-                                         'o', markersize=3, color=Constants.PLOT_COLOR_BLUE, picker=True, pickradius=5, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_RPEAK)
+                                         'o', markersize=3, color=Constants.PLOT_COLOR_BLUE, picker=True, pickradius=5,
+                                         label=Constants.PRECISELY_ALIGN_PLOT_LABEL_RPEAK)
             self.point1, = self.ax4.plot(plot_element["peak_BCG"], plot_element["res_BCG"][plot_element["peak_BCG"]],
-                                         'o', markersize=3, color=Constants.PLOT_COLOR_RED, picker=True, pickradius=5, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_JPEAK)
+                                         'o', markersize=3, color=Constants.PLOT_COLOR_RED, picker=True, pickradius=5,
+                                         label=Constants.PRECISELY_ALIGN_PLOT_LABEL_JPEAK)
 
             self.ax4.legend(loc=Constants.PLOT_UPPER_RIGHT)
 
@@ -556,10 +571,14 @@ class MainWindow_precisely_align(QMainWindow):
             self.ax4.xaxis.set_major_formatter(Params.FORMATTER)
 
             self.ax4.set_title("result preview")
-            self.ax4.plot(self.data.cut_ECG, color=Constants.PLOT_COLOR_GREEN, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_ECG)
-            self.ax4.plot(self.data.res_BCG, color=Constants.PLOT_COLOR_ORANGE, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_BCG)
-            self.ax4.plot(self.data.cut_Rpeak, self.data.cut_ECG[self.data.cut_Rpeak], 'v', color=Constants.PLOT_COLOR_BLUE, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_RPEAK)
-            self.ax4.plot(self.data.cut_Jpeak, self.data.res_BCG[self.data.cut_Jpeak], 'v', color=Constants.PLOT_COLOR_RED, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_JPEAK)
+            self.ax4.plot(self.data.cut_ECG, color=Constants.PLOT_COLOR_GREEN,
+                          label=Constants.PRECISELY_ALIGN_PLOT_LABEL_ECG)
+            self.ax4.plot(self.data.res_BCG, color=Constants.PLOT_COLOR_ORANGE,
+                          label=Constants.PRECISELY_ALIGN_PLOT_LABEL_BCG)
+            self.ax4.plot(self.data.cut_Rpeak, self.data.cut_ECG[self.data.cut_Rpeak], 'v',
+                          color=Constants.PLOT_COLOR_BLUE, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_RPEAK)
+            self.ax4.plot(self.data.cut_Jpeak, self.data.res_BCG[self.data.cut_Jpeak], 'v',
+                          color=Constants.PLOT_COLOR_RED, label=Constants.PRECISELY_ALIGN_PLOT_LABEL_JPEAK)
 
             self.ax4.legend(loc=Constants.PLOT_UPPER_RIGHT)
 
@@ -929,7 +948,8 @@ class MainWindow_precisely_align(QMainWindow):
         try:
             if self.data is not None:
                 if self.data.Jpeak is None or self.data.Rpeak is None:
-                    PublicFunc.msgbox_output(self, Constants.FAILURE_REASON["Data_Not_Exist"], Constants.MSGBOX_TYPE_ERROR)
+                    PublicFunc.msgbox_output(self, Constants.FAILURE_REASON["Data_Not_Exist"],
+                                             Constants.MSGBOX_TYPE_ERROR)
                     return
 
             sender = self.sender()
@@ -946,6 +966,31 @@ class MainWindow_precisely_align(QMainWindow):
                 Config["IV_Coordinate"]["BCG_front_2"] = self.ui.spinBox_BCG_front_JJIV_2.value()
                 Config["Coordinate"]["BCG_front_2"] = self.data.Jpeak[:-2][self.ui.spinBox_BCG_front_JJIV_2.value()]
                 self.ui.spinBox_BCG_front_Signal_2.setValue(Config["Coordinate"]["BCG_front_2"])
+                estimate_ECG_front_1 = self.data.get_corresponding_interval(Config["Coordinate"]["BCG_front_1"]).data[
+                    "new_point"]
+                estimate_ECG_front_2 = self.data.get_corresponding_interval(Config["Coordinate"]["BCG_front_2"]).data[
+                    "new_point"]
+                PublicFunc.text_output(self.ui, Constants.CORRESPONDING_INTERVAL_PROMOTE_TEMPLATE.format(
+                    Config["Coordinate"]["BCG_front_1"],
+                    Config["Coordinate"]["BCG_front_2"],
+                    estimate_ECG_front_1, estimate_ECG_front_2
+                ), Constants.TIPS_TYPE_INFO)
+
+                if self.ui.checkBox_ECG_autoset.isChecked():
+                    extend_second = int(self.ui.spinBox_ECG_expend_second.value())
+
+                    reponse = self.data.get_rriv_from_ecg_point(
+                        estimate_ECG_front_1, extend_second, "right").data
+                    Config["IV_Coordinate"]["ECG_front_1"] = reponse["estimate_RRIV"]
+                    Config["Coordinate"]["ECG_front_1"] = reponse["extend_point"]
+
+                    reponse = self.data.get_rriv_from_ecg_point(
+                        estimate_ECG_front_2, extend_second, "left").data
+
+                    Config["IV_Coordinate"]["ECG_front_2"] = reponse["estimate_RRIV"]
+                    Config["Coordinate"]["ECG_front_2"] = reponse["extend_point"]
+
+
             elif sender == self.ui.spinBox_BCG_back_JJIV_1:
                 if self.ui.spinBox_BCG_back_JJIV_1.value() >= len(self.data.Jpeak[:-2]):
                     self.ui.spinBox_BCG_back_JJIV_1.setValue(len(self.data.Jpeak[:-2]) - 1)
@@ -958,6 +1003,30 @@ class MainWindow_precisely_align(QMainWindow):
                 Config["IV_Coordinate"]["BCG_back_2"] = self.ui.spinBox_BCG_back_JJIV_2.value()
                 Config["Coordinate"]["BCG_back_2"] = self.data.Jpeak[:-2][self.ui.spinBox_BCG_back_JJIV_2.value()]
                 self.ui.spinBox_BCG_back_Signal_2.setValue(Config["Coordinate"]["BCG_back_2"])
+                estimate_ECG_back_1 = self.data.get_corresponding_interval(
+                    Config["Coordinate"]["BCG_back_1"]).data["new_point"]
+                estimate_ECG_back_2 = self.data.get_corresponding_interval(
+                    Config["Coordinate"]["BCG_back_2"]).data["new_point"]
+                PublicFunc.text_output(self.ui, Constants.CORRESPONDING_INTERVAL_PROMOTE_TEMPLATE.format(
+                    Config["Coordinate"]["BCG_back_1"],
+                    Config["Coordinate"]["BCG_back_2"],
+                    estimate_ECG_back_1, estimate_ECG_back_2
+                ), Constants.TIPS_TYPE_INFO)
+
+                if self.ui.checkBox_ECG_autoset.isChecked():
+                    extend_second = int(self.ui.spinBox_ECG_expend_second.value())
+
+                    reponse = self.data.get_rriv_from_ecg_point(
+                        estimate_ECG_back_1, extend_second, "right").data
+                    Config["IV_Coordinate"]["ECG_back_1"] = reponse["estimate_RRIV"]
+                    Config["Coordinate"]["ECG_back_1"] = reponse["extend_point"]
+
+                    reponse = self.data.get_rriv_from_ecg_point(
+                        estimate_ECG_back_2, extend_second, "left").data
+
+                    Config["IV_Coordinate"]["ECG_back_2"] = reponse["estimate_RRIV"]
+                    Config["Coordinate"]["ECG_back_2"] = reponse["extend_point"]
+
             elif sender == self.ui.spinBox_ECG_front_RRIV_1:
                 if self.ui.spinBox_ECG_front_RRIV_1.value() >= len(self.data.Rpeak[:-2]):
                     self.ui.spinBox_ECG_front_RRIV_1.setValue(len(self.data.Rpeak[:-2]) - 1)
@@ -970,6 +1039,8 @@ class MainWindow_precisely_align(QMainWindow):
                 Config["IV_Coordinate"]["ECG_front_2"] = self.ui.spinBox_ECG_front_RRIV_2.value()
                 Config["Coordinate"]["ECG_front_2"] = self.data.Rpeak[:-2][self.ui.spinBox_ECG_front_RRIV_2.value()]
                 self.ui.spinBox_ECG_front_Signal_2.setValue(Config["Coordinate"]["ECG_front_2"])
+
+
             elif sender == self.ui.spinBox_ECG_back_RRIV_1:
                 if self.ui.spinBox_ECG_back_RRIV_1.value() >= len(self.data.Rpeak[:-2]):
                     self.ui.spinBox_ECG_back_RRIV_1.setValue(len(self.data.Rpeak[:-2]) - 1)
@@ -982,7 +1053,9 @@ class MainWindow_precisely_align(QMainWindow):
                 Config["IV_Coordinate"]["ECG_back_2"] = self.ui.spinBox_ECG_back_RRIV_2.value()
                 Config["Coordinate"]["ECG_back_2"] = self.data.Rpeak[:-2][self.ui.spinBox_ECG_back_RRIV_2.value()]
                 self.ui.spinBox_ECG_back_Signal_2.setValue(Config["Coordinate"]["ECG_back_2"])
-        except AttributeError:
+
+        except AttributeError as e:
+            print(e)
             pass
 
     def reset_axes(self):
@@ -1039,12 +1112,15 @@ class MainWindow_precisely_align(QMainWindow):
                     plot_element["back"]["offset_interval"], plot_element["back"]["anchor_J"],
                     plot_element["back"]["anchor_R"]))
             self.selected_point0, = self.ax0.plot(plot_element["front"]["shift"],
-                                                  plot_element["front"]["corre"][plot_element["front"]["shift"]] + 1, 'v',
+                                                  plot_element["front"]["corre"][plot_element["front"]["shift"]] + 1,
+                                                  'v',
                                                   color=Constants.PLOT_COLOR_RED, picker=True, pickradius=5,
                                                   label=Constants.PRECISELY_ALIGN_PLOT_LABEL_SELECTED_POINT)
             self.stem_black0 = self.ax1.stem(arange(plot_element["front"]["shift"],
-                                                    plot_element["front"]["shift"] + len(plot_element["front"]["JJIVs"])),
-                                             plot_element["front"]["JJIVs"], markerfmt="ko", linefmt=Constants.PLOT_COLOR_GREEN,
+                                                    plot_element["front"]["shift"] + len(
+                                                        plot_element["front"]["JJIVs"])),
+                                             plot_element["front"]["JJIVs"], markerfmt="ko",
+                                             linefmt=Constants.PLOT_COLOR_GREEN,
                                              label=Constants.PRECISELY_ALIGN_PLOT_LABEL_JJIV)
             self.selected_point1, = self.ax2.plot(plot_element["back"]["shift"],
                                                   plot_element["back"]["corre"][plot_element["back"]["shift"]] + 1, 'v',
@@ -1052,7 +1128,8 @@ class MainWindow_precisely_align(QMainWindow):
                                                   label=Constants.PRECISELY_ALIGN_PLOT_LABEL_SELECTED_POINT)
             self.stem_black1 = self.ax3.stem(arange(plot_element["back"]["shift"],
                                                     plot_element["back"]["shift"] + len(plot_element["back"]["JJIVs"])),
-                                             plot_element["back"]["JJIVs"], markerfmt="ko", linefmt=Constants.PLOT_COLOR_GREEN,
+                                             plot_element["back"]["JJIVs"], markerfmt="ko",
+                                             linefmt=Constants.PLOT_COLOR_GREEN,
                                              label=Constants.PRECISELY_ALIGN_PLOT_LABEL_JJIV)
 
             self.ax0.autoscale(False)
@@ -1084,16 +1161,20 @@ class MainWindow_precisely_align(QMainWindow):
 
             if len(self.data.correlation_align_point_match_ECG) > 0:
                 self.selected_point0, = self.ax4.plot(
-                    [self.data.correlation_align_point_match_ECG[0], self.data.correlation_align_point_match_ECG[0]], [plot_element["b"], plot_element["a"]], 'b--')
+                    [self.data.correlation_align_point_match_ECG[0], self.data.correlation_align_point_match_ECG[0]],
+                    [plot_element["b"], plot_element["a"]], 'b--')
                 if len(self.data.correlation_align_point_match_ECG) == 2:
                     self.selected_point1, = self.ax4.plot(
-                        [self.data.correlation_align_point_match_ECG[1], self.data.correlation_align_point_match_ECG[1]], [plot_element["b"], plot_element["a"]], 'b--')
+                        [self.data.correlation_align_point_match_ECG[1],
+                         self.data.correlation_align_point_match_ECG[1]], [plot_element["b"], plot_element["a"]], 'b--')
             if len(self.data.correlation_align_point_match_BCG) > 0:
                 self.selected_point2, = self.ax4.plot(
-                    [self.data.correlation_align_point_match_BCG[0], self.data.correlation_align_point_match_BCG[0]], [plot_element["b"], plot_element["a"]], 'r--')
+                    [self.data.correlation_align_point_match_BCG[0], self.data.correlation_align_point_match_BCG[0]],
+                    [plot_element["b"], plot_element["a"]], 'r--')
                 if len(self.data.correlation_align_point_match_BCG) == 2:
                     self.selected_point3, = self.ax4.plot(
-                        [self.data.correlation_align_point_match_BCG[1], self.data.correlation_align_point_match_BCG[1]], [plot_element["b"], plot_element["a"]], 'r--')
+                        [self.data.correlation_align_point_match_BCG[1],
+                         self.data.correlation_align_point_match_BCG[1]], [plot_element["b"], plot_element["a"]], 'r--')
 
             self.ax4.autoscale(False)
             self.ax4.set_xlim(self.ax4_xlime)
@@ -1243,11 +1324,64 @@ class MainWindow_precisely_align(QMainWindow):
                                 Config["IV_Coordinate"]["BCG_front_2"] = indices[-1]
                                 Config["Coordinate"]["BCG_front_1"] = self.data.Jpeak[:-2][indices[0]]
                                 Config["Coordinate"]["BCG_front_2"] = self.data.Jpeak[:-2][indices[-1]]
+                                estimate_ECG_front_1 = self.data.get_corresponding_interval(
+                                    Config["Coordinate"]["BCG_front_1"]).data["new_point"]
+                                estimate_ECG_front_2 = self.data.get_corresponding_interval(
+                                    Config["Coordinate"]["BCG_front_2"]).data["new_point"]
+                                PublicFunc.text_output(
+                                    self.ui,
+                                    Constants.CORRESPONDING_INTERVAL_PROMOTE_TEMPLATE.format(
+                                        Config["Coordinate"]["BCG_front_1"],
+                                        Config["Coordinate"]["BCG_front_2"],
+                                        estimate_ECG_front_1, estimate_ECG_front_2
+                                    ), Constants.TIPS_TYPE_INFO)
+
+                                if self.ui.checkBox_ECG_autoset.isChecked():
+                                    extend_second = int(self.ui.spinBox_ECG_expend_second.value())
+
+                                    reponse = self.data.get_rriv_from_ecg_point(
+                                        estimate_ECG_front_1, extend_second, "right").data
+                                    Config["IV_Coordinate"]["ECG_front_1"] = reponse["estimate_RRIV"]
+                                    Config["Coordinate"]["ECG_front_1"] = reponse["extend_point"]
+
+                                    reponse = self.data.get_rriv_from_ecg_point(
+                                        estimate_ECG_front_2, extend_second, "left").data
+
+                                    Config["IV_Coordinate"]["ECG_front_2"] = reponse["estimate_RRIV"]
+                                    Config["Coordinate"]["ECG_front_2"] = reponse["extend_point"]
+
+
+
                             elif self.ui.radioButton_BCG_back.isChecked():
                                 Config["IV_Coordinate"]["BCG_back_1"] = indices[0]
                                 Config["IV_Coordinate"]["BCG_back_2"] = indices[-1]
                                 Config["Coordinate"]["BCG_back_1"] = self.data.Jpeak[:-2][indices[0]]
                                 Config["Coordinate"]["BCG_back_2"] = self.data.Jpeak[:-2][indices[-1]]
+                                estimate_ECG_back_1 = self.data.get_corresponding_interval(
+                                            Config["Coordinate"]["BCG_back_1"]).data["new_point"]
+                                estimate_ECG_back_2 = self.data.get_corresponding_interval(
+                                            Config["Coordinate"]["BCG_back_2"]).data["new_point"]
+                                PublicFunc.text_output(
+                                    self.ui, Constants.CORRESPONDING_INTERVAL_PROMOTE_TEMPLATE.format(
+                                        Config["Coordinate"]["BCG_back_1"],
+                                        Config["Coordinate"]["BCG_back_2"],
+                                        estimate_ECG_back_1, estimate_ECG_back_2
+                                    ), Constants.TIPS_TYPE_INFO)
+
+                                if self.ui.checkBox_ECG_autoset.isChecked():
+                                    extend_second = int(self.ui.spinBox_ECG_expend_second.value())
+
+                                    reponse = self.data.get_rriv_from_ecg_point(
+                                        estimate_ECG_back_1, extend_second, "right").data
+                                    Config["IV_Coordinate"]["ECG_back_1"] = reponse["estimate_RRIV"]
+                                    Config["Coordinate"]["ECG_back_1"] = reponse["extend_point"]
+
+                                    reponse = self.data.get_rriv_from_ecg_point(
+                                        estimate_ECG_back_2, extend_second, "left").data
+
+                                    Config["IV_Coordinate"]["ECG_back_2"] = reponse["estimate_RRIV"]
+                                    Config["Coordinate"]["ECG_back_2"] = reponse["extend_point"]
+
                     elif self.ui.radioButton_ECG_front.isChecked() or self.ui.radioButton_ECG_back.isChecked():
                         if rect_left < 0:
                             rect_left = 0
@@ -1279,6 +1413,7 @@ class MainWindow_precisely_align(QMainWindow):
                                 Config["IV_Coordinate"]["ECG_front_2"] = indices[-1]
                                 Config["Coordinate"]["ECG_front_1"] = self.data.Rpeak[:-2][indices[0]]
                                 Config["Coordinate"]["ECG_front_2"] = self.data.Rpeak[:-2][indices[-1]]
+
                             elif self.ui.radioButton_ECG_back.isChecked():
                                 Config["IV_Coordinate"]["ECG_back_1"] = indices[0]
                                 Config["IV_Coordinate"]["ECG_back_2"] = indices[-1]
@@ -1364,15 +1499,21 @@ class MainWindow_precisely_align(QMainWindow):
             if this_line == self.point0:
                 if nm in self.data.correlation_align_point_match_ECG:
                     self.data.correlation_align_point_match_ECG = delete(self.data.correlation_align_point_match_ECG,
-                                                                         where(self.data.correlation_align_point_match_ECG == nm)[0])
+                                                                         where(
+                                                                             self.data.correlation_align_point_match_ECG == nm)[
+                                                                             0])
                 elif len(self.data.correlation_align_point_match_ECG) < 2:
-                    self.data.correlation_align_point_match_ECG = append(self.data.correlation_align_point_match_ECG, nm)
+                    self.data.correlation_align_point_match_ECG = append(self.data.correlation_align_point_match_ECG,
+                                                                         nm)
             elif this_line == self.point1:
                 if nm in self.data.correlation_align_point_match_BCG:
                     self.data.correlation_align_point_match_BCG = delete(self.data.correlation_align_point_match_BCG,
-                                                                         where(self.data.correlation_align_point_match_BCG == nm)[0])
+                                                                         where(
+                                                                             self.data.correlation_align_point_match_BCG == nm)[
+                                                                             0])
                 elif len(self.data.correlation_align_point_match_BCG) < 2:
-                    self.data.correlation_align_point_match_BCG = append(self.data.correlation_align_point_match_BCG, nm)
+                    self.data.correlation_align_point_match_BCG = append(self.data.correlation_align_point_match_BCG,
+                                                                         nm)
             else:
                 raise ValueError("this_line不存在")
             self.__slot_btn_correlation_align__()
@@ -1389,6 +1530,9 @@ class Data:
         self.Rpeak = None
         self.Rpeak_y = None
         self.approximately_align_pos = None
+        self.approximately_align_estimated_freq = None
+        self.approximately_align_slope = None
+        self.approximately_align_intercept = None
         self.BCG_early = None
 
         self.res_orgBcg = None
@@ -1528,6 +1672,12 @@ class Data:
             else:
                 self.approximately_align_pos = 0
                 self.BCG_early = None
+
+            self.approximately_align_estimated_freq = df["estimate_freq"].values[-1]
+            self.approximately_align_slope = df["estimate_slope"].values[-1] / \
+                                             Params.APPROXIMATELY_ALIGN_CONFIG_NEW_CONTENT["Second_PerEpoch"]
+            self.approximately_align_intercept = df["estimate_intercept"].values[-1] * Config["InputConfig"]["UseFreq"]
+
         except Exception:
             self.approximately_align_pos = 0
 
@@ -1541,7 +1691,8 @@ class Data:
             if Config["InputConfig"]["orgBcgFreq"] != Config["InputConfig"]["UseFreq"]:
                 self.raw_orgBcg = resample(self.raw_orgBcg,
                                            int(len(self.raw_orgBcg) *
-                                               (Config["InputConfig"]["UseFreq"] / Config["InputConfig"]["orgBcgFreq"])))
+                                               (Config["InputConfig"]["UseFreq"] / Config["InputConfig"][
+                                                   "orgBcgFreq"])))
             else:
                 return Result().success(info=Constants.RESAMPLE_NO_NEED)
         except Exception as e:
@@ -1581,8 +1732,10 @@ class Data:
 
         try:
             if mode == "init":
-                self.JJIs0_front = self.JJIs[Config["IV_Coordinate"]["BCG_front_1"]:Config["IV_Coordinate"]["BCG_front_2"]]
-                self.RRIs0_front = self.RRIs[Config["IV_Coordinate"]["ECG_front_1"]:Config["IV_Coordinate"]["ECG_front_2"]]
+                self.JJIs0_front = self.JJIs[
+                                   Config["IV_Coordinate"]["BCG_front_1"]:Config["IV_Coordinate"]["BCG_front_2"]]
+                self.RRIs0_front = self.RRIs[
+                                   Config["IV_Coordinate"]["ECG_front_1"]:Config["IV_Coordinate"]["ECG_front_2"]]
                 self.JJIVs_front = diff(self.JJIs0_front)
                 self.RRIVs_front = diff(self.RRIs0_front)
                 self.corre_front = correlate(self.RRIVs_front, self.JJIVs_front, 'valid')
@@ -1632,7 +1785,8 @@ class Data:
             }
         except Exception as e:
             return Result().failure(info=Constants.PRECISELY_ALIGN_CALCULATE_FAILURE_FRONT +
-                                         Constants.FAILURE_REASON["Calculate_Correlation_Exception"] + "\n" + format_exc())
+                                         Constants.FAILURE_REASON[
+                                             "Calculate_Correlation_Exception"] + "\n" + format_exc())
 
         return Result().success(info=Constants.PRECISELY_ALIGN_CALCULATE_FINISHED_FRONT, data=result)
 
@@ -1700,7 +1854,8 @@ class Data:
             }
         except Exception as e:
             return Result().failure(info=Constants.PRECISELY_ALIGN_CALCULATE_FAILURE_BACK +
-                                         Constants.FAILURE_REASON["Calculate_Correlation_Exception"] + "\n" + format_exc())
+                                         Constants.FAILURE_REASON[
+                                             "Calculate_Correlation_Exception"] + "\n" + format_exc())
 
         return Result().success(info=Constants.PRECISELY_ALIGN_CALCULATE_FINISHED_BACK, data=result)
 
@@ -1796,7 +1951,9 @@ class Data:
             else:
                 self.correlation_align_point_match_ECG.sort()
                 self.correlation_align_point_match_BCG.sort()
-                off = round(((int(self.correlation_align_point_match_ECG[1]) - int(self.correlation_align_point_match_BCG[1])) + (int(self.correlation_align_point_match_ECG[0]) - int(self.correlation_align_point_match_BCG[0]))) / 2)
+                off = round(((int(self.correlation_align_point_match_ECG[1]) - int(
+                    self.correlation_align_point_match_BCG[1])) + (int(self.correlation_align_point_match_ECG[0]) - int(
+                    self.correlation_align_point_match_BCG[0]))) / 2)
 
             anchor0 = [Config["front"]["anchor_R"], Config["front"]["anchor_J"]]
             anchor1 = [Config["back"]["anchor_R"], Config["back"]["anchor_J"]]
@@ -1830,8 +1987,10 @@ class Data:
                 self.cut_Jpeak.append(peaks[idx])
             self.cut_Jpeak = asarray(self.cut_Jpeak).astype(int)
 
-            frontcut_index_BCG = int((self.argmax_BCG - np_argmax(self.res_BCG) / Config["InputConfig"]["UseFreq"] * Config["orgfs"]))
-            backcut_index_BCG = int(len(self.res_BCG) / Config["InputConfig"]["UseFreq"] * Config["orgfs"] + np_argmax(self.raw_BCG) - np_argmax(self.res_BCG) / Config["InputConfig"]["UseFreq"] * Config["orgfs"])
+            frontcut_index_BCG = int(
+                (self.argmax_BCG - np_argmax(self.res_BCG) / Config["InputConfig"]["UseFreq"] * Config["orgfs"]))
+            backcut_index_BCG = int(len(self.res_BCG) / Config["InputConfig"]["UseFreq"] * Config["orgfs"] + np_argmax(
+                self.raw_BCG) - np_argmax(self.res_BCG) / Config["InputConfig"]["UseFreq"] * Config["orgfs"])
             frontcut_index_ECG = self.argmax_ECG - np_argmax(self.cut_ECG)
             backcut_index_ECG = len(self.cut_ECG) + self.argmax_ECG - np_argmax(self.cut_ECG)
 
@@ -1889,7 +2048,8 @@ class Data:
         return Result().success(info=Constants.PRECISELY_ALIGN_SAVING_ALIGNINFO_FINISHED)
 
     def save_res_orgBcg(self, chunk):
-        if (not Path(Config["Path"]["Save_OrgBCG"]).parent.exists()) or (not Path(Config["Path"]["Save_OrgBCG"]).parent.is_dir()):
+        if (not Path(Config["Path"]["Save_OrgBCG"]).parent.exists()) or (
+                not Path(Config["Path"]["Save_OrgBCG"]).parent.is_dir()):
             Path(Config["Path"]["Save_OrgBCG"]).parent.mkdir(parents=True, exist_ok=True)
 
         if Config["InputConfig"]["orgBcgFreq"] != Config["InputConfig"]["UseFreq"]:
@@ -1912,7 +2072,8 @@ class Data:
         return Result().success(info=Constants.PRECISELY_ALIGN_SAVING_RES_ORGBCG_FINISHED)
 
     def save_res_BCG(self, chunk):
-        if (not Path(Config["Path"]["Save_BCG"]).parent.exists()) or (not Path(Config["Path"]["Save_BCG"]).parent.is_dir()):
+        if (not Path(Config["Path"]["Save_BCG"]).parent.exists()) or (
+                not Path(Config["Path"]["Save_BCG"]).parent.is_dir()):
             Path(Config["Path"]["Save_BCG"]).parent.mkdir(parents=True, exist_ok=True)
 
         if self.res_BCG is None:
@@ -1930,7 +2091,8 @@ class Data:
         return Result().success(info=Constants.PRECISELY_ALIGN_SAVING_RES_BCG_FINISHED)
 
     def save_cut_ECG(self, chunk):
-        if (not Path(Config["Path"]["Save_ECG"]).parent.exists()) or (not Path(Config["Path"]["Save_ECG"]).parent.is_dir()):
+        if (not Path(Config["Path"]["Save_ECG"]).parent.exists()) or (
+                not Path(Config["Path"]["Save_ECG"]).parent.is_dir()):
             Path(Config["Path"]["Save_ECG"]).parent.mkdir(parents=True, exist_ok=True)
 
         if self.cut_ECG is None:
@@ -1948,7 +2110,8 @@ class Data:
         return Result().success(info=Constants.PRECISELY_ALIGN_SAVING_CUT_ECG_FINISHED)
 
     def save_Jpeak(self, chunk):
-        if (not Path(Config["Path"]["Save_ECG"]).parent.exists()) or (not Path(Config["Path"]["Save_ECG"]).parent.is_dir()):
+        if (not Path(Config["Path"]["Save_ECG"]).parent.exists()) or (
+                not Path(Config["Path"]["Save_ECG"]).parent.is_dir()):
             Path(Config["Path"]["Save_ECG"]).parent.mkdir(parents=True, exist_ok=True)
 
         if self.cut_Jpeak is None:
@@ -1966,7 +2129,8 @@ class Data:
         return Result().success(info=Constants.PRECISELY_ALIGN_SAVING_CUT_JPEAK_FINISHED)
 
     def save_Rpeak(self, chunk):
-        if (not Path(Config["Path"]["Save_Rpeak"]).parent.exists()) or (not Path(Config["Path"]["Save_Rpeak"]).parent.is_dir()):
+        if (not Path(Config["Path"]["Save_Rpeak"]).parent.exists()) or (
+                not Path(Config["Path"]["Save_Rpeak"]).parent.is_dir()):
             Path(Config["Path"]["Save_Rpeak"]).parent.mkdir(parents=True, exist_ok=True)
 
         if self.cut_Rpeak is None:
@@ -1983,6 +2147,48 @@ class Data:
 
         return Result().success(info=Constants.PRECISELY_ALIGN_SAVING_CUT_RPEAK_FINISHED)
 
+    def get_corresponding_interval(self, point, bcg2ecg=True):
+        try:
+
+            if self.BCG_early:
+                pos = -self.approximately_align_pos
+            else:
+                pos = self.approximately_align_pos
+
+            if bcg2ecg:
+                new_point = point / self.approximately_align_estimated_freq + pos - self.approximately_align_intercept
+            else:
+                new_point = (point - pos + self.approximately_align_intercept) * self.approximately_align_estimated_freq
+
+            result = {
+                "new_point": int(new_point)
+            }
+
+        except Exception as e:
+            return Result().failure(info=Constants.PRECISELY_ALIGN_GET_CORRESPONDING_INTERVAL_FAILURE +
+                                         Constants.FAILURE_REASON[
+                                             "Get_Corresponding_Interval_Exception"] + "\n" + format_exc())
+
+        return Result().success(info=Constants.PRECISELY_ALIGN_GET_CORRESPONDING_INTERVAL_FINISHED, data=result)
+
+    def get_rriv_from_ecg_point(self, point:int, expend_second:int, side="left"):
+        extend_point = expend_second * Config["InputConfig"]["UseFreq"]
+
+        if side == "left":
+            extend_point = max(point + extend_point, 0)
+        elif side == "right":
+            extend_point = min(point - extend_point, max(self.Rpeak))
+
+        else:
+            return Result().failure(info=Constants.PRECISELY_ALIGN_GET_RRIV_FROM_ECG_POINT_FAILURE +
+                                         Constants.FAILURE_REASON["Invalid_Side_Parameter"])
+
+        extend_estimate_RRIV = searchsorted(self.Rpeak[:-2], extend_point, side)
+        result = {
+            "estimate_RRIV": extend_estimate_RRIV,
+            "extend_point": extend_point
+        }
+        return Result().success(info=Constants.PRECISELY_ALIGN_GET_RRIV_FROM_ECG_POINT_FINISHED, data=result)
 
 class CustomNavigationToolbar(NavigationToolbar2QT):
 

func/utils/ConfigParams.py

@@ -105,6 +105,7 @@ class Params:
             "BandPassHigh": 0.7
         },
         "Multiple_Factor":100,
+        "Second_PerEpoch": 30,
         "CorrByEpoch":
             {
                 "window_epoch": 6

func/utils/Constants.py

@@ -46,6 +46,8 @@ class Constants:
     SAVE_FINISHED: str = "保存完成"
     SAVE_FAILURE: str = "保存失败"
 
+    CORRESPONDING_INTERVAL_PROMOTE_TEMPLATE: str = "经粗对齐计算BCG({},{})对应的ECG约区间为({},{})"
+
     OPERATION_FINISHED: str = "操作完成"
     OPERATION_FAILURE: str = "操作失败"
     OPERATION_CANCELED: str = "操作取消"
@@ -126,11 +128,13 @@ class Constants:
         "Calculate_Correlation1_Exception": "（计算互相关1/2异常）",
         "Calculate_Correlation2_Exception": "（计算互相关2/2异常）",
         "Calculate_Maxvalue_Pos_Exception": "（计算最大值位置异常）",
+        "Invalid_Side_Parameter": "（无效的方向参数）",
         "Get_Epoch_Exception": "（获取epoch异常）",
         "Get_Corr_By_Epoch_Exception": "（通过epoch获取相关性异常）",
         "Predict_Exception": "（预测异常，请检查模型文件存放是否正确或检测方法是否正确）",
         "Read_Model_Exception": "（读取模型异常）",
         "Calculate_Correlation_Value_Equal": "（计算相关性参数相同）",
+        "Get_Corresponding_Interval_Exception": "（获取对应区间异常）",
         "Calculate_Correlation_JJIVRange_too_Large": "（计算相关性JJIV范围大于RRIV范围）",
         "Calculate_Correlation_Exception": "（计算相关性异常）",
         "Correlation_Align_Exception": "（处理相关对齐异常）",
@@ -192,6 +196,10 @@ class Constants:
     APPROXIMATELY_EPOCH_GET_FINISHED: str = "获取epoch完成"
     APPROXIMATELY_EPOCH_GET_FAILURE: str = "获取epoch失败"
 
+    APPROXIMATELY_ESTIMATE_FREQUENCY_CALCULATING: str = "正在估计采样率"
+    APPROXIMATELY_ESTIMATE_FREQUENCY_FINISHED: str = "估计采样率完成"
+    APPROXIMATELY_ESTIMATE_FREQUENCY_FAILURE: str = "估计采样率失败"
+
     # 预处理
     PREPROCESS_PLOT_LABEL_ORIGINAL_DATA: str = "Original_Data"
     PREPROCESS_PLOT_LABEL_PROCESSED_DATA: str = "Processed_Data"
@@ -253,6 +261,11 @@ class Constants:
     PRECISELY_ALIGN_PROCESS_FINISHED: str = "处理完成"
     PRECISELY_ALIGN_PROCESS_FAILURE: str = "处理失败"
 
+    #
+    PRECISELY_ALIGN_GET_RRIV_FROM_ECG_POINT_FAILURE: str = "从ECG点获取RRIV失败"
+    PRECISELY_ALIGN_GET_RRIV_FROM_ECG_POINT_FINISHED: str = "从ECG点获取RRIV完成"
+
+
     PRECISELY_ALIGN_CALCULATING_CORRELATION_FRONT: str = "正在计算前段相关性"
     PRECISELY_ALIGN_CALCULATE_FINISHED_FRONT: str = "计算前段相关性完成"
     PRECISELY_ALIGN_CALCULATE_FAILURE_FRONT: str = "计算前段相关性失败"
@@ -260,6 +273,10 @@ class Constants:
     PRECISELY_ALIGN_CALCULATE_FINISHED_BACK: str = "计算后段相关性完成"
     PRECISELY_ALIGN_CALCULATE_FAILURE_BACK: str = "计算后段相关性失败"
 
+    PRECISELY_ALIGN_GET_CORRESPONDING_INTERVAL : str = "正在获取对应区间"
+    PRECISELY_ALIGN_GET_CORRESPONDING_INTERVAL_FAILURE : str = "获取对应区间失败"
+    PRECISELY_ALIGN_GET_CORRESPONDING_INTERVAL_FINISHED : str = "获取对应区间完成"
+
     PRECISELY_ALIGN_ALIGNING_CORRELATION: str = "正在处理相关对齐"
     PRECISELY_ALIGN_ALIGN_CORRELATION_FINISHED: str = "处理相关对齐完成"
     PRECISELY_ALIGN_ALIGN_CORRELATION_FAILURE: str = "处理相关对齐失败"

ui/MainWindow/MainWindow_approximately_align.py

@@ -317,11 +317,12 @@ class Ui_MainWindow_approximately_align(object):
         self.groupBox_align_position.setObjectName(u"groupBox_align_position")
         self.gridLayout_2 = QGridLayout(self.groupBox_align_position)
         self.gridLayout_2.setObjectName(u"gridLayout_2")
-        self.radioButton_PABD = QRadioButton(self.groupBox_align_position)
-        self.radioButton_PABD.setObjectName(u"radioButton_PABD")
-        self.radioButton_PABD.setFont(font1)
+        self.pushButton_ChangeView = QPushButton(self.groupBox_align_position)
+        self.pushButton_ChangeView.setObjectName(u"pushButton_ChangeView")
+        self.pushButton_ChangeView.setMinimumSize(QSize(0, 30))
+        self.pushButton_ChangeView.setFont(font1)
 
-        self.gridLayout_2.addWidget(self.radioButton_PABD, 1, 2, 1, 1)
+        self.gridLayout_2.addWidget(self.pushButton_ChangeView, 0, 2, 1, 1)
 
         self.radioButton_NTHO = QRadioButton(self.groupBox_align_position)
         self.radioButton_NTHO.setObjectName(u"radioButton_NTHO")
@@ -329,12 +330,37 @@ class Ui_MainWindow_approximately_align(object):
 
         self.gridLayout_2.addWidget(self.radioButton_NTHO, 1, 1, 1, 1)
 
+        self.radioButton_PTHO = QRadioButton(self.groupBox_align_position)
+        self.radioButton_PTHO.setObjectName(u"radioButton_PTHO")
+        self.radioButton_PTHO.setFont(font1)
+
+        self.gridLayout_2.addWidget(self.radioButton_PTHO, 1, 0, 1, 1)
+
         self.radioButton_custom = QRadioButton(self.groupBox_align_position)
         self.radioButton_custom.setObjectName(u"radioButton_custom")
         self.radioButton_custom.setFont(font1)
 
         self.gridLayout_2.addWidget(self.radioButton_custom, 2, 1, 1, 1)
 
+        self.radioButton_PABD = QRadioButton(self.groupBox_align_position)
+        self.radioButton_PABD.setObjectName(u"radioButton_PABD")
+        self.radioButton_PABD.setFont(font1)
+
+        self.gridLayout_2.addWidget(self.radioButton_PABD, 1, 2, 1, 1)
+
+        self.pushButton_GetPos = QPushButton(self.groupBox_align_position)
+        self.pushButton_GetPos.setObjectName(u"pushButton_GetPos")
+        self.pushButton_GetPos.setMinimumSize(QSize(0, 30))
+        self.pushButton_GetPos.setFont(font1)
+
+        self.gridLayout_2.addWidget(self.pushButton_GetPos, 0, 0, 1, 1)
+
+        self.radioButton_NABD = QRadioButton(self.groupBox_align_position)
+        self.radioButton_NABD.setObjectName(u"radioButton_NABD")
+        self.radioButton_NABD.setFont(font1)
+
+        self.gridLayout_2.addWidget(self.radioButton_NABD, 2, 0, 1, 1)
+
         self.spinBox_custom = QSpinBox(self.groupBox_align_position)
         self.spinBox_custom.setObjectName(u"spinBox_custom")
         self.spinBox_custom.setMinimumSize(QSize(90, 0))
@@ -346,35 +372,38 @@ class Ui_MainWindow_approximately_align(object):
 
         self.gridLayout_2.addWidget(self.spinBox_custom, 2, 2, 1, 1)
 
-        self.radioButton_PTHO = QRadioButton(self.groupBox_align_position)
-        self.radioButton_PTHO.setObjectName(u"radioButton_PTHO")
-        self.radioButton_PTHO.setFont(font1)
-
-        self.gridLayout_2.addWidget(self.radioButton_PTHO, 1, 0, 1, 1)
-
-        self.radioButton_NABD = QRadioButton(self.groupBox_align_position)
-        self.radioButton_NABD.setObjectName(u"radioButton_NABD")
-        self.radioButton_NABD.setFont(font1)
-
-        self.gridLayout_2.addWidget(self.radioButton_NABD, 2, 0, 1, 1)
-
-        self.pushButton_GetPos = QPushButton(self.groupBox_align_position)
-        self.pushButton_GetPos.setObjectName(u"pushButton_GetPos")
-        self.pushButton_GetPos.setMinimumSize(QSize(0, 30))
-        self.pushButton_GetPos.setFont(font1)
-
-        self.gridLayout_2.addWidget(self.pushButton_GetPos, 0, 0, 1, 1)
-
-        self.pushButton_ChangeView = QPushButton(self.groupBox_align_position)
-        self.pushButton_ChangeView.setObjectName(u"pushButton_ChangeView")
-        self.pushButton_ChangeView.setMinimumSize(QSize(0, 30))
-        self.pushButton_ChangeView.setFont(font1)
-
-        self.gridLayout_2.addWidget(self.pushButton_ChangeView, 0, 2, 1, 1)
-
 
         self.verticalLayout.addWidget(self.groupBox_align_position)
 
+        self.groupBox_2 = QGroupBox(self.groupBox_left)
+        self.groupBox_2.setObjectName(u"groupBox_2")
+        self.groupBox_2.setMinimumSize(QSize(0, 0))
+        self.layoutWidget = QWidget(self.groupBox_2)
+        self.layoutWidget.setObjectName(u"layoutWidget")
+        self.layoutWidget.setGeometry(QRect(11, 18, 401, 41))
+        self.verticalLayout_3 = QVBoxLayout(self.layoutWidget)
+        self.verticalLayout_3.setObjectName(u"verticalLayout_3")
+        self.verticalLayout_3.setContentsMargins(0, 0, 0, 0)
+        self.horizontalLayout_3 = QHBoxLayout()
+        self.horizontalLayout_3.setObjectName(u"horizontalLayout_3")
+        self.radioButton_freqTHO = QRadioButton(self.layoutWidget)
+        self.radioButton_freqTHO.setObjectName(u"radioButton_freqTHO")
+        self.radioButton_freqTHO.setFont(font1)
+
+        self.horizontalLayout_3.addWidget(self.radioButton_freqTHO)
+
+        self.radioButton_freqABD = QRadioButton(self.layoutWidget)
+        self.radioButton_freqABD.setObjectName(u"radioButton_freqABD")
+        self.radioButton_freqABD.setFont(font1)
+
+        self.horizontalLayout_3.addWidget(self.radioButton_freqABD)
+
+
+        self.verticalLayout_3.addLayout(self.horizontalLayout_3)
+
+
+        self.verticalLayout.addWidget(self.groupBox_2)
+
         self.groupBox_view_partially = QGroupBox(self.groupBox_left)
         self.groupBox_view_partially.setObjectName(u"groupBox_view_partially")
         self.verticalLayout_2 = QVBoxLayout(self.groupBox_view_partially)
@@ -456,10 +485,6 @@ class Ui_MainWindow_approximately_align(object):
 
         self.verticalLayout.addWidget(self.groupBox_view_partially)
 
-        self.verticalSpacer = QSpacerItem(20, 40, QSizePolicy.Policy.Minimum, QSizePolicy.Policy.Expanding)
-
-        self.verticalLayout.addItem(self.verticalSpacer)
-
         self.pushButton_save = QPushButton(self.groupBox_left)
         self.pushButton_save.setObjectName(u"pushButton_save")
         sizePolicy.setHeightForWidth(self.pushButton_save.sizePolicy().hasHeightForWidth())
@@ -483,11 +508,12 @@ class Ui_MainWindow_approximately_align(object):
         self.verticalLayout.setStretch(0, 1)
         self.verticalLayout.setStretch(1, 1)
         self.verticalLayout.setStretch(2, 3)
-        self.verticalLayout.setStretch(4, 2)
-        self.verticalLayout.setStretch(5, 4)
-        self.verticalLayout.setStretch(6, 1)
+        self.verticalLayout.setStretch(3, 4)
+        self.verticalLayout.setStretch(4, 3)
+        self.verticalLayout.setStretch(5, 2)
+        self.verticalLayout.setStretch(6, 4)
         self.verticalLayout.setStretch(7, 1)
-        self.verticalLayout.setStretch(8, 4)
+        self.verticalLayout.setStretch(8, 6)
 
         self.gridLayout.addWidget(self.groupBox_left, 0, 0, 1, 1)
 
@@ -541,13 +567,16 @@ class Ui_MainWindow_approximately_align(object):
         self.label_8.setText(QCoreApplication.translate("MainWindow_approximately_align", u"PSG_Post\uff1a", None))
         self.pushButton_CutOff.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5e94\u7528", None))
         self.groupBox_align_position.setTitle(QCoreApplication.translate("MainWindow_approximately_align", u"\u5bf9\u9f50\u8d77\u59cb\u4f4d\u7f6e", None))
-        self.radioButton_PABD.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5907\u90093", None))
+        self.pushButton_ChangeView.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u4f30\u8ba1\u91c7\u6837\u7387", None))
         self.radioButton_NTHO.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5907\u90092", None))
-        self.radioButton_custom.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u81ea\u5b9a\u4e49", None))
         self.radioButton_PTHO.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5907\u90091", None))
-        self.radioButton_NABD.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5907\u90094", None))
+        self.radioButton_custom.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u81ea\u5b9a\u4e49", None))
+        self.radioButton_PABD.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5907\u90093", None))
         self.pushButton_GetPos.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u8ba1\u7b97\u5bf9\u9f50", None))
-        self.pushButton_ChangeView.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5207\u6362\u89c6\u56fe", None))
+        self.radioButton_NABD.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5907\u90094", None))
+        self.groupBox_2.setTitle(QCoreApplication.translate("MainWindow_approximately_align", u"\u91c7\u6837\u7387\u4f30\u8ba1", None))
+        self.radioButton_freqTHO.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5907\u90091", None))
+        self.radioButton_freqABD.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u5907\u90092", None))
         self.groupBox_view_partially.setTitle(QCoreApplication.translate("MainWindow_approximately_align", u"\u5c40\u90e8\u89c2\u6d4b", None))
         self.label_9.setText(QCoreApplication.translate("MainWindow_approximately_align", u"Epoch\uff1a", None))
         self.pushButton_JUMP.setText(QCoreApplication.translate("MainWindow_approximately_align", u"\u8df3\u8f6c", None))

ui/MainWindow/MainWindow_approximately_align.ui

@@ -25,7 +25,7 @@
       <property name="title">
        <string>数据粗同步</string>
       </property>
-      <layout class="QVBoxLayout" name="verticalLayout" stretch="1,1,3,0,2,4,1,1,4">
+      <layout class="QVBoxLayout" name="verticalLayout" stretch="1,1,3,4,3,2,4,1,6">
        <item>
         <layout class="QHBoxLayout" name="horizontalLayout_4">
          <item>
@@ -531,15 +531,21 @@
           <string>对齐起始位置</string>
          </property>
          <layout class="QGridLayout" name="gridLayout_2">
-          <item row="1" column="2">
-           <widget class="QRadioButton" name="radioButton_PABD">
+          <item row="0" column="2">
+           <widget class="QPushButton" name="pushButton_ChangeView">
+            <property name="minimumSize">
+             <size>
+              <width>0</width>
+              <height>30</height>
+             </size>
+            </property>
             <property name="font">
              <font>
               <pointsize>12</pointsize>
              </font>
             </property>
             <property name="text">
-             <string>备选3</string>
+             <string>估计采样率</string>
             </property>
            </widget>
           </item>
@@ -555,6 +561,18 @@
             </property>
            </widget>
           </item>
+          <item row="1" column="0">
+           <widget class="QRadioButton" name="radioButton_PTHO">
+            <property name="font">
+             <font>
+              <pointsize>12</pointsize>
+             </font>
+            </property>
+            <property name="text">
+             <string>备选1</string>
+            </property>
+           </widget>
+          </item>
           <item row="2" column="1">
            <widget class="QRadioButton" name="radioButton_custom">
             <property name="font">
@@ -567,6 +585,48 @@
             </property>
            </widget>
           </item>
+          <item row="1" column="2">
+           <widget class="QRadioButton" name="radioButton_PABD">
+            <property name="font">
+             <font>
+              <pointsize>12</pointsize>
+             </font>
+            </property>
+            <property name="text">
+             <string>备选3</string>
+            </property>
+           </widget>
+          </item>
+          <item row="0" column="0">
+           <widget class="QPushButton" name="pushButton_GetPos">
+            <property name="minimumSize">
+             <size>
+              <width>0</width>
+              <height>30</height>
+             </size>
+            </property>
+            <property name="font">
+             <font>
+              <pointsize>12</pointsize>
+             </font>
+            </property>
+            <property name="text">
+             <string>计算对齐</string>
+            </property>
+           </widget>
+          </item>
+          <item row="2" column="0">
+           <widget class="QRadioButton" name="radioButton_NABD">
+            <property name="font">
+             <font>
+              <pointsize>12</pointsize>
+             </font>
+            </property>
+            <property name="text">
+             <string>备选4</string>
+            </property>
+           </widget>
+          </item>
           <item row="2" column="2">
            <widget class="QSpinBox" name="spinBox_custom">
             <property name="minimumSize">
@@ -594,69 +654,62 @@
             </property>
            </widget>
           </item>
-          <item row="1" column="0">
-           <widget class="QRadioButton" name="radioButton_PTHO">
-            <property name="font">
-             <font>
-              <pointsize>12</pointsize>
-             </font>
-            </property>
-            <property name="text">
-             <string>备选1</string>
-            </property>
-           </widget>
-          </item>
-          <item row="2" column="0">
-           <widget class="QRadioButton" name="radioButton_NABD">
-            <property name="font">
-             <font>
-              <pointsize>12</pointsize>
-             </font>
-            </property>
-            <property name="text">
-             <string>备选4</string>
-            </property>
-           </widget>
-          </item>
-          <item row="0" column="0">
-           <widget class="QPushButton" name="pushButton_GetPos">
-            <property name="minimumSize">
-             <size>
-              <width>0</width>
-              <height>30</height>
-             </size>
-            </property>
-            <property name="font">
-             <font>
-              <pointsize>12</pointsize>
-             </font>
-            </property>
-            <property name="text">
-             <string>计算对齐</string>
-            </property>
-           </widget>
-          </item>
-          <item row="0" column="2">
-           <widget class="QPushButton" name="pushButton_ChangeView">
-            <property name="minimumSize">
-             <size>
-              <width>0</width>
-              <height>30</height>
-             </size>
-            </property>
-            <property name="font">
-             <font>
-              <pointsize>12</pointsize>
-             </font>
-            </property>
-            <property name="text">
-             <string>切换视图</string>
-            </property>
-           </widget>
-          </item>
          </layout>
         </widget>
        </item>
+       <item>
+        <widget class="QGroupBox" name="groupBox_2">
+         <property name="minimumSize">
+          <size>
+           <width>0</width>
+           <height>0</height>
+          </size>
+         </property>
+         <property name="title">
+          <string>采样率估计</string>
+         </property>
+         <widget class="QWidget" name="layoutWidget">
+          <property name="geometry">
+           <rect>
+            <x>11</x>
+            <y>18</y>
+            <width>401</width>
+            <height>41</height>
+           </rect>
+          </property>
+          <layout class="QVBoxLayout" name="verticalLayout_3">
+           <item>
+            <layout class="QHBoxLayout" name="horizontalLayout_3">
+             <item>
+              <widget class="QRadioButton" name="radioButton_freqTHO">
+               <property name="font">
+                <font>
+                 <pointsize>12</pointsize>
+                </font>
+               </property>
+               <property name="text">
+                <string>备选1</string>
+               </property>
+              </widget>
+             </item>
+             <item>
+              <widget class="QRadioButton" name="radioButton_freqABD">
+               <property name="font">
+                <font>
+                 <pointsize>12</pointsize>
+                </font>
+               </property>
+               <property name="text">
+                <string>备选2</string>
+               </property>
+              </widget>
+             </item>
+            </layout>
+           </item>
+          </layout>
+         </widget>
+        </widget>
+       </item>
        <item>
         <widget class="QGroupBox" name="groupBox_view_partially">
          <property name="title">
@@ -807,19 +860,6 @@
          </layout>
         </widget>
        </item>
-       <item>
-        <spacer name="verticalSpacer">
-         <property name="orientation">
-          <enum>Qt::Orientation::Vertical</enum>
-         </property>
-         <property name="sizeHint" stdset="0">
-          <size>
-           <width>20</width>
-           <height>40</height>
-          </size>
-         </property>
-        </spacer>
-       </item>
        <item>
         <widget class="QPushButton" name="pushButton_save">
          <property name="sizePolicy">

ui/MainWindow/MainWindow_precisely_align.py

@@ -3,7 +3,7 @@
 ################################################################################
 ## Form generated from reading UI file 'MainWindow_precisely_align.ui'
 ##
-## Created by: Qt User Interface Compiler version 6.8.2
+## Created by: Qt User Interface Compiler version 6.7.0
 ##
 ## WARNING! All changes made in this file will be lost when recompiling UI file!
 ################################################################################
@@ -16,10 +16,11 @@ from PySide6.QtGui import (QAction, QBrush, QColor, QConicalGradient,
     QIcon, QImage, QKeySequence, QLinearGradient,
     QPainter, QPalette, QPixmap, QRadialGradient,
     QTransform)
-from PySide6.QtWidgets import (QAbstractSpinBox, QApplication, QGridLayout, QGroupBox,
-    QHBoxLayout, QLabel, QMainWindow, QPushButton,
-    QRadioButton, QSizePolicy, QSpacerItem, QSpinBox,
-    QStatusBar, QTextBrowser, QVBoxLayout, QWidget)
+from PySide6.QtWidgets import (QAbstractSpinBox, QApplication, QCheckBox, QGridLayout,
+    QGroupBox, QHBoxLayout, QLabel, QMainWindow,
+    QPushButton, QRadioButton, QSizePolicy, QSpacerItem,
+    QSpinBox, QStatusBar, QTextBrowser, QVBoxLayout,
+    QWidget)
 
 class Ui_MainWindow_precisely_align(object):
     def setupUi(self, MainWindow_precisely_align):
@@ -96,6 +97,38 @@ class Ui_MainWindow_precisely_align(object):
         self.groupBox_args.setObjectName(u"groupBox_args")
         self.verticalLayout_5 = QVBoxLayout(self.groupBox_args)
         self.verticalLayout_5.setObjectName(u"verticalLayout_5")
+        self.groupBox_6 = QGroupBox(self.groupBox_args)
+        self.groupBox_6.setObjectName(u"groupBox_6")
+        self.horizontalLayout = QHBoxLayout(self.groupBox_6)
+        self.horizontalLayout.setObjectName(u"horizontalLayout")
+        self.checkBox_ECG_autoset = QCheckBox(self.groupBox_6)
+        self.checkBox_ECG_autoset.setObjectName(u"checkBox_ECG_autoset")
+        self.checkBox_ECG_autoset.setChecked(True)
+
+        self.horizontalLayout.addWidget(self.checkBox_ECG_autoset)
+
+        self.horizontalSpacer = QSpacerItem(40, 20, QSizePolicy.Policy.Preferred, QSizePolicy.Policy.Minimum)
+
+        self.horizontalLayout.addItem(self.horizontalSpacer)
+
+        self.label_17 = QLabel(self.groupBox_6)
+        self.label_17.setObjectName(u"label_17")
+        self.label_17.setAlignment(Qt.AlignmentFlag.AlignRight|Qt.AlignmentFlag.AlignTrailing|Qt.AlignmentFlag.AlignVCenter)
+
+        self.horizontalLayout.addWidget(self.label_17)
+
+        self.spinBox_ECG_expend_second = QSpinBox(self.groupBox_6)
+        self.spinBox_ECG_expend_second.setObjectName(u"spinBox_ECG_expend_second")
+        self.spinBox_ECG_expend_second.setAlignment(Qt.AlignmentFlag.AlignRight|Qt.AlignmentFlag.AlignTrailing|Qt.AlignmentFlag.AlignVCenter)
+        self.spinBox_ECG_expend_second.setButtonSymbols(QAbstractSpinBox.ButtonSymbols.NoButtons)
+        self.spinBox_ECG_expend_second.setMaximum(1000000)
+        self.spinBox_ECG_expend_second.setValue(30)
+
+        self.horizontalLayout.addWidget(self.spinBox_ECG_expend_second)
+
+
+        self.verticalLayout_5.addWidget(self.groupBox_6)
+
         self.groupBox_2 = QGroupBox(self.groupBox_args)
         self.groupBox_2.setObjectName(u"groupBox_2")
         self.verticalLayout_2 = QVBoxLayout(self.groupBox_2)
@@ -426,6 +459,11 @@ class Ui_MainWindow_precisely_align(object):
 
         self.verticalLayout_5.addWidget(self.groupBox_5)
 
+        self.verticalLayout_5.setStretch(0, 2)
+        self.verticalLayout_5.setStretch(1, 2)
+        self.verticalLayout_5.setStretch(2, 2)
+        self.verticalLayout_5.setStretch(3, 2)
+        self.verticalLayout_5.setStretch(4, 2)
 
         self.verticalLayout.addWidget(self.groupBox_args)
 
@@ -489,7 +527,6 @@ class Ui_MainWindow_precisely_align(object):
 
         self.verticalLayout.setStretch(0, 1)
         self.verticalLayout.setStretch(1, 7)
-        self.verticalLayout.setStretch(2, 2)
         self.verticalLayout.setStretch(3, 1)
         self.verticalLayout.setStretch(4, 1)
         self.verticalLayout.setStretch(5, 5)
@@ -517,6 +554,9 @@ class Ui_MainWindow_precisely_align(object):
         self.pushButton_input_setting.setText(QCoreApplication.translate("MainWindow_precisely_align", u"\u5bfc\u5165\u8bbe\u7f6e", None))
         self.pushButton_input.setText(QCoreApplication.translate("MainWindow_precisely_align", u"\u5f00\u59cb\u5bfc\u5165", None))
         self.groupBox_args.setTitle(QCoreApplication.translate("MainWindow_precisely_align", u"\u53c2\u6570\u8f93\u5165", None))
+        self.groupBox_6.setTitle(QCoreApplication.translate("MainWindow_precisely_align", u"ECG\u81ea\u52a8\u83b7\u53d6\u533a\u95f4", None))
+        self.checkBox_ECG_autoset.setText(QCoreApplication.translate("MainWindow_precisely_align", u"\u81ea\u52a8\u83b7\u53d6ECG\u533a\u95f4", None))
+        self.label_17.setText(QCoreApplication.translate("MainWindow_precisely_align", u"\u62d3\u5c55\u79d2\u6570\uff1a", None))
         self.groupBox_2.setTitle(QCoreApplication.translate("MainWindow_precisely_align", u"\u524d\u6bb5BCG\u533a\u95f4\u5750\u6807\u53d6\u503c", None))
         self.radioButton_BCG_front.setText(QCoreApplication.translate("MainWindow_precisely_align", u"\u524d\u6bb5BCG", None))
         self.label_4.setText(QCoreApplication.translate("MainWindow_precisely_align", u"~", None))

ui/MainWindow/MainWindow_precisely_align.ui

@@ -56,7 +56,7 @@
       <property name="title">
        <string>数据精同步</string>
       </property>
-      <layout class="QVBoxLayout" name="verticalLayout" stretch="1,7,2,1,1,5">
+      <layout class="QVBoxLayout" name="verticalLayout" stretch="1,7,0,1,1,5">
        <item>
         <layout class="QHBoxLayout" name="horizontalLayout_4">
          <item>
@@ -102,7 +102,68 @@
          <property name="title">
           <string>参数输入</string>
          </property>
-         <layout class="QVBoxLayout" name="verticalLayout_5" stretch="0,0,0,0">
+         <layout class="QVBoxLayout" name="verticalLayout_5" stretch="2,2,2,2,2">
+          <item>
+           <widget class="QGroupBox" name="groupBox_6">
+            <property name="title">
+             <string>ECG自动获取区间</string>
+            </property>
+            <layout class="QHBoxLayout" name="horizontalLayout">
+             <item>
+              <widget class="QCheckBox" name="checkBox_ECG_autoset">
+               <property name="text">
+                <string>自动获取ECG区间</string>
+               </property>
+               <property name="checked">
+                <bool>true</bool>
+               </property>
+              </widget>
+             </item>
+             <item>
+              <spacer name="horizontalSpacer">
+               <property name="orientation">
+                <enum>Qt::Orientation::Horizontal</enum>
+               </property>
+               <property name="sizeType">
+                <enum>QSizePolicy::Policy::Preferred</enum>
+               </property>
+               <property name="sizeHint" stdset="0">
+                <size>
+                 <width>40</width>
+                 <height>20</height>
+                </size>
+               </property>
+              </spacer>
+             </item>
+             <item>
+              <widget class="QLabel" name="label_17">
+               <property name="text">
+                <string>拓展秒数：</string>
+               </property>
+               <property name="alignment">
+                <set>Qt::AlignmentFlag::AlignRight|Qt::AlignmentFlag::AlignTrailing|Qt::AlignmentFlag::AlignVCenter</set>
+               </property>
+              </widget>
+             </item>
+             <item>
+              <widget class="QSpinBox" name="spinBox_ECG_expend_second">
+               <property name="alignment">
+                <set>Qt::AlignmentFlag::AlignRight|Qt::AlignmentFlag::AlignTrailing|Qt::AlignmentFlag::AlignVCenter</set>
+               </property>
+               <property name="buttonSymbols">
+                <enum>QAbstractSpinBox::ButtonSymbols::NoButtons</enum>
+               </property>
+               <property name="maximum">
+                <number>1000000</number>
+               </property>
+               <property name="value">
+                <number>30</number>
+               </property>
+              </widget>
+             </item>
+            </layout>
+           </widget>
+          </item>
           <item>
            <widget class="QGroupBox" name="groupBox_2">
             <property name="title">